【偏置式旋轉閥】適用于≤2kg/cm2系統壓力或壓差。設置排氣口(正壓輸送時選用)將葉輪旋轉帶出的氣體通過排氣口送至排氣裝置，提高填充效率。

　　Biased rotary valves are suitable for system pressures or pressure differentials of ≤ 2kg/cm 2. Set up an exhaust port (selected for positive pressure conveying) to send the gas carried out by the impeller rotation to the exhaust device through the exhaust port, improving the filling efficiency.

　　1. 進料口采用防卡進料口設計，能將物料均勻投入葉輪每個角落。根據不同介質調整間隙設計，采用V形葉片及其他特殊轉子形式，物料運行更流暢。

　　2. 進料口設有防切料入口設計，適用于顆粒、塊狀、片狀物料輸送。通過減少葉輪與閥體的接觸面，物料被撥開分離有更多角度落入葉腔，減少阻力，卡滯問題。

　　法蘭形式：圓形、方形、偏置式

　　廣泛適用于石化、化工、鋼廠、電廠、礦山、水泥、環保等行業中氣力輸送、計量等場合，尤其適用顆粒料，也可用于粉末料的輸送。【電話/微信咨詢：陳經理18068546632】

　　偏置式旋轉閥產品特點：

　　殼體及主要零部件采用精密鑄造，外形美觀;

　　高強度的閥體及軸，可承受高壓且運轉平穩;

　　特殊防卡料設計，避免運轉中粒子剪斷現象;【電話/微信咨詢：陳經理18068546632】

　　先進的軸部密封結構，采用氣體吹掃裝置防止粉塵進入軸承。

          《掃二維碼-添加 陳經理 微信-咨詢偏置式旋轉閥》

　　1. The feed inlet adopts an anti jamming design, which can evenly feed the material into every corner of the impeller. Adjust the gap design according to different media, adopt V-shaped blades and other special rotor forms, and ensure smoother material operation.

　　2. The feed inlet is designed with anti cutting material inlet, suitable for conveying granular, block, and sheet materials. By reducing the contact surface between the impeller and the valve body, the material is separated and more angles fall into the blade cavity, reducing resistance and jamming problems.

　　Flange form: circular, square, offset type.

　　Widely applicable in industries such as petrochemicals, chemicals, steel mills, power plants, mines, cement, environmental protection, etc. for pneumatic conveying, metering, etc., especially suitable for granular materials, and can also be used for conveying powder materials.